Écrire des Programmes

Comment transférer SOL dans un programme

Votre Programme Solana peut transférer des lamports d'un compte à un autre sans "invoquer" le programme du Système (System program). La règle fondamentale est que votre programme peut transférer des lamports de n'importe quel compte appartenant à votre programme vers n'importe quel compte.

Le compte destinataire ne doit pas nécessairement être un compte appartenant à votre programme.

/// Transfers lamports from one account (must be program owned)
/// to another account. The recipient can by any account
fn transfer_service_fee_lamports(
    from_account: &AccountInfo,
    to_account: &AccountInfo,
    amount_of_lamports: u64,
) -> ProgramResult {
    // Does the from account have enough lamports to transfer?
    if **from_account.try_borrow_lamports()? < amount_of_lamports {
        return Err(CustomError::InsufficientFundsForTransaction.into());
    }
    // Debit from_account and credit to_account
    **from_account.try_borrow_mut_lamports()? -= amount_of_lamports;
    **to_account.try_borrow_mut_lamports()? += amount_of_lamports;
    Ok(())
}

/// Primary function handler associated with instruction sent
/// to your program
fn instruction_handler(accounts: &[AccountInfo]) -> ProgramResult {
    // Get the 'from' and 'to' accounts
    let account_info_iter = &mut accounts.iter();
    let from_account = next_account_info(account_info_iter)?;
    let to_service_account = next_account_info(account_info_iter)?;

    // Extract a service 'fee' of 5 lamports for performing this instruction
    transfer_service_fee_lamports(from_account, to_service_account, 5u64)?;

    // Perform the primary instruction
    // ... etc.

    Ok(())
}

Comment obtenir une référence à l'horloge dans un programme

L'obtention d'une horloge peut se faire de deux manières

Passer SYSVAR_CLOCK_PUBKEY dans une instruction
Accéder à l'Horloge directement à l'intérieur d'une instruction.

Il est bon de connaître les deux méthodes, car certains programmes hérités attendent toujours la SYSVAR_CLOCK_PUBKEY comme compte.

Passer l'Horloge comme un compte dans une instruction

Créons une instruction qui reçoit un compte pour l'initialisation et la clé publique de sysvar

Press </> button to view full source

use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    clock::Clock,
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    pubkey::Pubkey,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer, writable] Payer
/// 2. [writable] Hello state account
/// 3. [] Clock sys var
pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let _payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;
    // Clock sysvar
    let sysvar_clock_pubkey = next_account_info(accounts_iter)?;

    let mut hello_state = HelloState::try_from_slice(&hello_state_account.data.borrow())?;
    hello_state.is_initialized = true;
    hello_state.serialize(&mut &mut hello_state_account.data.borrow_mut()[..])?;
    msg!("Account initialized :)");

    // Type casting [AccountInfo] to [Clock]
    let clock = Clock::from_account_info(&sysvar_clock_pubkey)?;
    // Getting timestamp
    let current_timestamp = clock.unix_timestamp;
    msg!("Current Timestamp: {}", current_timestamp);

    Ok(())
}

Maintenant nous passons l'adresse publique sysvar de l'horloge via le client

Press </> button to view full source

import {
  clusterApiUrl,
  Connection,
  Keypair,
  LAMPORTS_PER_SOL,
  PublicKey,
  SystemProgram,
  SYSVAR_CLOCK_PUBKEY,
  Transaction,
  TransactionInstruction,
} from "@solana/web3.js";

(async () => {
  const programId = new PublicKey(
    "77ezihTV6mTh2Uf3ggwbYF2NyGJJ5HHah1GrdowWJVD3"
  );

  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");

  // Airdropping 1 SOL
  const feePayer = Keypair.generate();
  await connection.confirmTransaction(
    await connection.requestAirdrop(feePayer.publicKey, LAMPORTS_PER_SOL)
  );

  // Hello state account
  const helloAccount = Keypair.generate();

  const accountSpace = 1; // because there exists just one boolean variable
  const rentRequired = await connection.getMinimumBalanceForRentExemption(
    accountSpace
  );

  // Allocating space for hello state account
  const allocateHelloAccountIx = SystemProgram.createAccount({
    fromPubkey: feePayer.publicKey,
    lamports: rentRequired,
    newAccountPubkey: helloAccount.publicKey,
    programId: programId,
    space: accountSpace,
  });

  // Passing Clock Sys Var
  const passClockIx = new TransactionInstruction({
    programId: programId,
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: feePayer.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: helloAccount.publicKey,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: SYSVAR_CLOCK_PUBKEY,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(allocateHelloAccountIx, passClockIx);

  const txHash = await connection.sendTransaction(transaction, [
    feePayer,
    helloAccount,
  ]);

  console.log(`Transaction succeeded. TxHash: ${txHash}`);
})();

(async () => {
  const programId = new PublicKey(
    "77ezihTV6mTh2Uf3ggwbYF2NyGJJ5HHah1GrdowWJVD3"
  );

  // Passing Clock Sys Var
  const passClockIx = new TransactionInstruction({
    programId: programId,
    keys: [
      {
        isSigner: false,
        isWritable: true,
        pubkey: helloAccount.publicKey,
      },
      {
        is_signer: false,
        is_writable: false,
        pubkey: SYSVAR_CLOCK_PUBKEY,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(passClockIx);

  const txHash = await connection.sendTransaction(transaction, [
    feePayer,
    helloAccount,
  ]);

  console.log(`Transaction succeeded. TxHash: ${txHash}`);
})();

Accéder à l'horloge directement dans une instruction

Créons la même instruction, mais sans exiger la SYSVAR_CLOCK_PUBKEY du côté client.

Press </> button to view full source

use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    clock::Clock,
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    pubkey::Pubkey,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer, writable] Payer
/// 2. [writable] Hello state account
pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let _payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;

    // Getting clock directly
    let clock = Clock::get()?;

    let mut hello_state = HelloState::try_from_slice(&hello_state_account.data.borrow())?;
    hello_state.is_initialized = true;
    hello_state.serialize(&mut &mut hello_state_account.data.borrow_mut()[..])?;
    msg!("Account initialized :)");

    // Getting timestamp
    let current_timestamp = clock.unix_timestamp;
    msg!("Current Timestamp: {}", current_timestamp);

    Ok(())
}

L'instruction côté client ne doit plus transmettre que les comptes de l'état et du payeur.

Press </> button to view full source

import {
  clusterApiUrl,
  Connection,
  Keypair,
  LAMPORTS_PER_SOL,
  PublicKey,
  SystemProgram,
  Transaction,
  TransactionInstruction,
} from "@solana/web3.js";

(async () => {
  const programId = new PublicKey(
    "4ZEdbCtb5UyCSiAMHV5eSHfyjq3QwbG3yXb6oHD7RYjk"
  );

  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");

  // Airdropping 1 SOL
  const feePayer = Keypair.generate();
  await connection.confirmTransaction(
    await connection.requestAirdrop(feePayer.publicKey, LAMPORTS_PER_SOL)
  );

  // Hello state account
  const helloAccount = Keypair.generate();

  const accountSpace = 1; // because there exists just one boolean variable
  const rentRequired = await connection.getMinimumBalanceForRentExemption(
    accountSpace
  );

  // Allocating space for hello state account
  const allocateHelloAccountIx = SystemProgram.createAccount({
    fromPubkey: feePayer.publicKey,
    lamports: rentRequired,
    newAccountPubkey: helloAccount.publicKey,
    programId: programId,
    space: accountSpace,
  });

  const initIx = new TransactionInstruction({
    programId: programId,
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: feePayer.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: helloAccount.publicKey,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(allocateHelloAccountIx, initIx);

  const txHash = await connection.sendTransaction(transaction, [
    feePayer,
    helloAccount,
  ]);

  console.log(`Transaction succeeded. TxHash: ${txHash}`);
})();

(async () => {
  const programId = new PublicKey(
    "4ZEdbCtb5UyCSiAMHV5eSHfyjq3QwbG3yXb6oHD7RYjk"
  );

  // No more requirement to pass clock sys var key
  const initAccountIx = new TransactionInstruction({
    programId: programId,
    keys: [
      {
        isSigner: false,
        isWritable: true,
        pubkey: helloAccount.publicKey,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(initAccountIx);

  const txHash = await connection.sendTransaction(transaction, [
    feePayer,
    helloAccount,
  ]);

  console.log(`Transaction succeeded. TxHash: ${txHash}`);
})();

Comment modifier la taille d'un compte

Vous pouvez modifier la taille d'un compte propriétaire d'un programme en utilisant realloc. realloc peut redimensionner un compte jusqu'à 10KB. Lorsque vous utilisez realloc pour augmenter la taille d'un compte, vous devez transférer des lamports afin de garder ce compte exempt de rente.

Press </> button to view full source

use {
  crate::{
      instruction::WhitelistInstruction,
      state::WhiteListData,
  },
  borsh::{BorshDeserialize, BorshSerialize},
  solana_program::{
      account_info::{next_account_info, AccountInfo},
      entrypoint::ProgramResult,
      msg,
      program::invoke_signed,
      program::invoke,
      program_error::ProgramError,
      pubkey::Pubkey,
      sysvar::Sysvar,
      sysvar::rent::Rent,
      system_instruction,
  },
  std::convert::TryInto,
};

pub fn process_instruction(
  _program_id: &Pubkey,
  accounts: &[AccountInfo],
  input: &[u8],
) -> ProgramResult {
  // Length = BOOL + VEC + Pubkey * n (n = number of keys)
  const INITIAL_ACCOUNT_LEN: usize = 1 + 4 + 0 ;
  msg!("input: {:?}", input);

  let instruction = WhitelistInstruction::try_from_slice(input)?;

  let accounts_iter = &mut accounts.iter();

  let funding_account = next_account_info(accounts_iter)?;
  let pda_account = next_account_info(accounts_iter)?;
  let system_program = next_account_info(accounts_iter)?;

  match instruction {
    WhitelistInstruction::Initialize => {
      msg!("Initialize");

      let (pda, pda_bump) = Pubkey::find_program_address(
          &[
            b"customaddress",
            &funding_account.key.to_bytes(),
          ],
          _program_id,
      );

      let signers_seeds: &[&[u8]; 3] = &[
          b"customaddress",
          &funding_account.key.to_bytes(),
          &[pda_bump],
      ];
      
      if pda.ne(&pda_account.key) {
          return Err(ProgramError::InvalidAccountData);
      }

      let lamports_required = Rent::get()?.minimum_balance(INITIAL_ACCOUNT_LEN);
      let create_pda_account_ix = system_instruction::create_account(
          &funding_account.key,
          &pda_account.key,
          lamports_required,
          INITIAL_ACCOUNT_LEN.try_into().unwrap(),
          &_program_id,
      );

      invoke_signed(
          &create_pda_account_ix,
          &[
              funding_account.clone(),
              pda_account.clone(),
              system_program.clone(),
          ],
          &[signers_seeds],
      )?;
      
      let mut pda_account_state = WhiteListData::try_from_slice(&pda_account.data.borrow())?;

      pda_account_state.is_initialized = true;
      pda_account_state.white_list = Vec::new();
      pda_account_state.serialize(&mut &mut pda_account.data.borrow_mut()[..])?;
      Ok(())
    }
    WhitelistInstruction::AddKey { key } => {
      msg!("AddKey");

      let mut pda_account_state = WhiteListData::try_from_slice(&pda_account.data.borrow())?;
      
      if !pda_account_state.is_initialized {
          return Err(ProgramError::InvalidAccountData);
      }

      let new_size = pda_account.data.borrow().len() + 32;

      let rent = Rent::get()?;
      let new_minimum_balance = rent.minimum_balance(new_size);
      
      let lamports_diff = new_minimum_balance.saturating_sub(pda_account.lamports());
      invoke(
          &system_instruction::transfer(funding_account.key, pda_account.key, lamports_diff),
          &[
              funding_account.clone(),
              pda_account.clone(),
              system_program.clone(),
          ],
      )?;

      pda_account.realloc(new_size, false)?;

      pda_account_state.white_list.push(key);
      pda_account_state.serialize(&mut &mut pda_account.data.borrow_mut()[..])?;

      Ok(())
    }
  }
}

// adding a publickey to the account
let new_size = pda_account.data.borrow().len() + 32;

let rent = Rent::get()?;
let new_minimum_balance = rent.minimum_balance(new_size);

let lamports_diff = new_minimum_balance.saturating_sub(pda_account.lamports());
invoke(
    &system_instruction::transfer(funding_account.key, pda_account.key, lamports_diff),
    &[
        funding_account.clone(),
        pda_account.clone(),
        system_program.clone(),
    ],
)?;

pda_account.realloc(new_size, false)?;

Comment faire l'Invocation de Programme Croisé

Une invocation de programme croisé est tout simplement l'appel d'une instruction d'un autre programme dans notre programme. Le meilleur exemple à mettre en avant est la fonctionnalité swap d'Uniswap. Le contrat UniswapV2Router appelle la logique nécessaire pour faire le swap et appelle la fonction de transfert du contrat ERC20 pour effectuer l'échange d'une personne à une autre. De la même manière, on peut appeler l'instruction d'un programme pour avoir une multitude de buts.

Examinons notre premier exemple qui est l'instruction de transfert du Programme de Jetons SPL. Les comptes requis pour qu'un transfert ait lieu sont les suivants

Le Compte de Jetons Source (Le compte sur lequel nous détenons nos jetons)
Le Compte de Jetons de Destination (Le compte vers lequel nous souhaitons transférer nos jetons)
Le Propriétaire du Compte de Jetons Source (L'adresse de notre portefeuille avec lequel nous signerons)

Press </> button to view full source

use solana_program::{
    account_info::{next_account_info, AccountInfo},
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    program::invoke,
    program_error::ProgramError,
    pubkey::Pubkey,
};
use spl_token::instruction::transfer;

entrypoint!(process_instruction);

// Accounts required
/// 1. [writable] Source Token Account
/// 2. [writable] Destination Token Account
/// 3. [signer] Source Token Account holder's PubKey
/// 4. [] Token Program
pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();

    // Accounts required for token transfer

    // 1. Token account we hold
    let source_token_account = next_account_info(accounts_iter)?;
    // 2. Token account to send to
    let destination_token_account = next_account_info(accounts_iter)?;
    // 3. Our wallet address
    let source_token_account_holder = next_account_info(accounts_iter)?;
    // 4. Token Program
    let token_program = next_account_info(accounts_iter)?;

    // Parsing the token transfer amount from instruction data
    // a. Getting the 0th to 8th index of the u8 byte array
    // b. Converting the obtained non zero u8 to a proper u8 (as little endian integers)
    // c. Converting the little endian integers to a u64 number
    let token_transfer_amount = instruction_data
        .get(..8)
        .and_then(|slice| slice.try_into().ok())
        .map(u64::from_le_bytes)
        .ok_or(ProgramError::InvalidAccountData)?;

    msg!(
        "Transferring {} tokens from {} to {}",
        token_transfer_amount,
        source_token_account.key.to_string(),
        destination_token_account.key.to_string()
    );

    // Creating a new TransactionInstruction
    /*
        Internal representation of the instruction's return value (Result<Instruction, ProgramError>)

        Ok(Instruction {
            program_id: *token_program_id, // PASSED FROM USER
            accounts,
            data,
        })
    */

    let transfer_tokens_instruction = transfer(
        &token_program.key,
        &source_token_account.key,
        &destination_token_account.key,
        &source_token_account_holder.key,
        &[&source_token_account_holder.key],
        token_transfer_amount,
    )?;

    let required_accounts_for_transfer = [
        source_token_account.clone(),
        destination_token_account.clone(),
        source_token_account_holder.clone(),
    ];

    // Passing the TransactionInstruction to send
    invoke(
        &transfer_tokens_instruction,
        &required_accounts_for_transfer,
    )?;

    msg!("Transfer successful");

    Ok(())
}

let token_transfer_amount = instruction_data
    .get(..8)
    .and_then(|slice| slice.try_into().ok())
    .map(u64::from_le_bytes)
    .ok_or(ProgramError::InvalidAccountData)?;

let transfer_tokens_instruction = transfer(
    &token_program.key,
    &source_token_account.key,
    &destination_token_account.key,
    &source_token_account_holder.key,
    &[&source_token_account_holder.key],
    token_transfer_amount,
)?;

let required_accounts_for_transfer = [
    source_token_account.clone(),
    destination_token_account.clone(),
    source_token_account_holder.clone(),
];

invoke(
    &transfer_tokens_instruction,
    &required_accounts_for_transfer,
)?;

L'instruction client correspondante serait la suivante. Pour connaître les instructions de création de mint et de jetons, veuillez vous référer au code complet.

Press </> button to view full source

import {
  clusterApiUrl,
  Connection,
  Keypair,
  LAMPORTS_PER_SOL,
  PublicKey,
  SystemProgram,
  Transaction,
  TransactionInstruction,
} from "@solana/web3.js";
import {
  AccountLayout,
  MintLayout,
  Token,
  TOKEN_PROGRAM_ID,
  u64,
} from "@solana/spl-token";

import * as BN from "bn.js";

// Users
const PAYER_KEYPAIR = Keypair.generate();
const RECEIVER_KEYPAIR = Keypair.generate().publicKey;

// Mint and token accounts
const TOKEN_MINT_ACCOUNT = Keypair.generate();
const SOURCE_TOKEN_ACCOUNT = Keypair.generate();
const DESTINATION_TOKEN_ACCOUNT = Keypair.generate();

// Numbers
const DEFAULT_DECIMALS_COUNT = 9;
const TOKEN_TRANSFER_AMOUNT = 50 * 10 ** DEFAULT_DECIMALS_COUNT;
const TOKEN_TRANSFER_AMOUNT_BUFFER = Buffer.from(
  Uint8Array.of(...new BN(TOKEN_TRANSFER_AMOUNT).toArray("le", 8))
);

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "EfYK91eN3AqTwY1C34W6a33qGAtQ8HJYVhNv7cV4uMZj"
  );

  const mintDataSpace = MintLayout.span;
  const mintRentRequired = await connection.getMinimumBalanceForRentExemption(
    mintDataSpace
  );

  const tokenDataSpace = AccountLayout.span;
  const tokenRentRequired = await connection.getMinimumBalanceForRentExemption(
    tokenDataSpace
  );

  // Airdropping some SOL
  await connection.confirmTransaction(
    await connection.requestAirdrop(PAYER_KEYPAIR.publicKey, LAMPORTS_PER_SOL)
  );

  // Allocating space and rent for mint account
  const createMintAccountIx = SystemProgram.createAccount({
    fromPubkey: PAYER_KEYPAIR.publicKey,
    lamports: mintRentRequired,
    newAccountPubkey: TOKEN_MINT_ACCOUNT.publicKey,
    programId: TOKEN_PROGRAM_ID,
    space: mintDataSpace,
  });

  // Initializing mint with decimals and authority
  const initializeMintIx = Token.createInitMintInstruction(
    TOKEN_PROGRAM_ID,
    TOKEN_MINT_ACCOUNT.publicKey,
    DEFAULT_DECIMALS_COUNT,
    PAYER_KEYPAIR.publicKey, // mintAuthority
    PAYER_KEYPAIR.publicKey // freezeAuthority
  );

  // Allocating space and rent for source token account
  const createSourceTokenAccountIx = SystemProgram.createAccount({
    fromPubkey: PAYER_KEYPAIR.publicKey,
    newAccountPubkey: SOURCE_TOKEN_ACCOUNT.publicKey,
    lamports: tokenRentRequired,
    programId: TOKEN_PROGRAM_ID,
    space: tokenDataSpace,
  });

  // Initializing token account with mint and owner
  const initializeSourceTokenAccountIx = Token.createInitAccountInstruction(
    TOKEN_PROGRAM_ID,
    TOKEN_MINT_ACCOUNT.publicKey,
    SOURCE_TOKEN_ACCOUNT.publicKey,
    PAYER_KEYPAIR.publicKey
  );

  // Minting tokens to the source token account for transferring later to destination account
  const mintTokensIx = Token.createMintToInstruction(
    TOKEN_PROGRAM_ID,
    TOKEN_MINT_ACCOUNT.publicKey,
    SOURCE_TOKEN_ACCOUNT.publicKey,
    PAYER_KEYPAIR.publicKey,
    [PAYER_KEYPAIR],
    TOKEN_TRANSFER_AMOUNT
  );

  // Allocating space and rent for destination token account
  const createDestinationTokenAccountIx = SystemProgram.createAccount({
    fromPubkey: PAYER_KEYPAIR.publicKey,
    newAccountPubkey: DESTINATION_TOKEN_ACCOUNT.publicKey,
    lamports: tokenRentRequired,
    programId: TOKEN_PROGRAM_ID,
    space: tokenDataSpace,
  });

  // Initializing token account with mint and owner
  const initializeDestinationTokenAccountIx =
    Token.createInitAccountInstruction(
      TOKEN_PROGRAM_ID,
      TOKEN_MINT_ACCOUNT.publicKey,
      DESTINATION_TOKEN_ACCOUNT.publicKey,
      RECEIVER_KEYPAIR
    );

  // Our program's CPI instruction (transfer)
  const transferTokensIx = new TransactionInstruction({
    programId: programId,
    data: TOKEN_TRANSFER_AMOUNT_BUFFER,
    keys: [
      {
        isSigner: false,
        isWritable: true,
        pubkey: SOURCE_TOKEN_ACCOUNT.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: DESTINATION_TOKEN_ACCOUNT.publicKey,
      },
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: TOKEN_PROGRAM_ID,
      },
    ],
  });

  const transaction = new Transaction();
  // Adding up all the above instructions
  transaction.add(
    createMintAccountIx,
    initializeMintIx,
    createSourceTokenAccountIx,
    initializeSourceTokenAccountIx,
    mintTokensIx,
    createDestinationTokenAccountIx,
    initializeDestinationTokenAccountIx,
    transferTokensIx
  );

  const txHash = await connection.sendTransaction(transaction, [
    PAYER_KEYPAIR,
    TOKEN_MINT_ACCOUNT,
    SOURCE_TOKEN_ACCOUNT,
    DESTINATION_TOKEN_ACCOUNT,
  ]);

  console.log(`Token transfer CPI success: ${txHash}`);
})();

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "EfYK91eN3AqTwY1C34W6a33qGAtQ8HJYVhNv7cV4uMZj"
  );

  const transferTokensIx = new TransactionInstruction({
    programId: programId,
    data: TOKEN_TRANSFER_AMOUNT_BUFFER,
    keys: [
      {
        isSigner: false,
        isWritable: true,
        pubkey: SOURCE_TOKEN_ACCOUNT.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: DESTINATION_TOKEN_ACCOUNT.publicKey,
      },
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: TOKEN_PROGRAM_ID,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(transferTokensIx);

  const txHash = await connection.sendTransaction(transaction, [
    PAYER_KEYPAIR,
    TOKEN_MINT_ACCOUNT,
    SOURCE_TOKEN_ACCOUNT,
    DESTINATION_TOKEN_ACCOUNT,
  ]);

  console.log(`Token transfer CPI success: ${txHash}`);
})();

Maintenant, regardons un autre exemple qui est l'instruction create_account du Programme du Système. Il y a une légère différence entre l'instruction mentionnée ci-dessus et celle-ci. Ici, nous n'avons pas à passer le token_program comme l'un des comptes dans la fonction invoke. Cependant, il y a des exceptions où vous devez transmettre le program_id de l'instruction invoquante. Dans notre cas, il s'agit du program_id du Programme du Système. ("11111111111111111111111111111111"). Ainsi, les comptes requis seraient les suivants

Le compte payeur qui paie la rente
Le compte qui va être créé
Le compte du Programme du Système

Press </> button to view full source

use solana_program::{
    account_info::{next_account_info, AccountInfo},
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    program::invoke,
    program_error::ProgramError,
    pubkey::Pubkey,
    rent::Rent,
    system_instruction::create_account,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

// Accounts required
/// 1. [signer, writable] Payer Account
/// 2. [signer, writable] General State Account
/// 3. [] System Program
pub fn process_instruction(
    program_id: &Pubkey,
    accounts: &[AccountInfo],
    instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();

    // Accounts required for token transfer

    // 1. Payer account for the state account creation
    let payer_account = next_account_info(accounts_iter)?;
    // 2. Token account we hold
    let general_state_account = next_account_info(accounts_iter)?;
    // 3. System Program
    let system_program = next_account_info(accounts_iter)?;

    msg!(
        "Creating account for {}",
        general_state_account.key.to_string()
    );

    // Parsing the token transfer amount from instruction data
    // a. Getting the 0th to 8th index of the u8 byte array
    // b. Converting the obtained non zero u8 to a proper u8 (as little endian integers)
    // c. Converting the little endian integers to a u64 number
    let account_span = instruction_data
        .get(..8)
        .and_then(|slice| slice.try_into().ok())
        .map(u64::from_le_bytes)
        .ok_or(ProgramError::InvalidAccountData)?;

    let lamports_required = (Rent::get()?).minimum_balance(account_span as usize);

    // Creating a new TransactionInstruction
    /*
        Internal representation of the instruction's return value (Instruction)

        Instruction::new_with_bincode(
            system_program::id(), // NOT PASSED FROM USER
            &SystemInstruction::CreateAccount {
                lamports,
                space,
                owner: *owner,
            },
            account_metas,
        )
    */

    let create_account_instruction = create_account(
        &payer_account.key,
        &general_state_account.key,
        lamports_required,
        account_span,
        program_id,
    );

    let required_accounts_for_create = [
        payer_account.clone(),
        general_state_account.clone(),
        system_program.clone(),
    ];

    // Passing the TransactionInstruction to send (with the issused program_id)
    invoke(&create_account_instruction, &required_accounts_for_create)?;

    msg!("Transfer successful");

    Ok(())
}

let account_span = instruction_data
    .get(..8)
    .and_then(|slice| slice.try_into().ok())
    .map(u64::from_le_bytes)
    .ok_or(ProgramError::InvalidAccountData)?;

let lamports_required = (Rent::get()?).minimum_balance(account_span as usize);

let create_account_instruction = create_account(
    &payer_account.key,
    &general_state_account.key,
    lamports_required,
    account_span,
    program_id,
);

let required_accounts_for_create = [
    payer_account.clone(),
    general_state_account.clone(),
    system_program.clone(),
];

invoke(&create_account_instruction, &required_accounts_for_create)?;

Le code côté client correspondant sera le suivant

Press </> button to view full source

import { clusterApiUrl, Connection, Keypair } from "@solana/web3.js";
import { LAMPORTS_PER_SOL, PublicKey, SystemProgram } from "@solana/web3.js";
import { Transaction, TransactionInstruction } from "@solana/web3.js";

import * as BN from "bn.js";

// Users
const PAYER_KEYPAIR = Keypair.generate();
const GENERAL_STATE_KEYPAIR = Keypair.generate();

const ACCOUNT_SPACE_BUFFER = Buffer.from(
  Uint8Array.of(...new BN(100).toArray("le", 8))
);

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "DkuQ5wsndkzXfgqDB6Lgf4sDjBi4gkLSak1dM5Mn2RuQ"
  );

  // Airdropping some SOL
  await connection.confirmTransaction(
    await connection.requestAirdrop(PAYER_KEYPAIR.publicKey, LAMPORTS_PER_SOL)
  );

  // Our program's CPI instruction (create_account)
  const createAccountIx = new TransactionInstruction({
    programId: programId,
    data: ACCOUNT_SPACE_BUFFER,
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: true,
        isWritable: true,
        pubkey: GENERAL_STATE_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: SystemProgram.programId,
      },
    ],
  });

  const transaction = new Transaction();
  // Adding up all the above instructions
  transaction.add(createAccountIx);

  const txHash = await connection.sendTransaction(transaction, [
    PAYER_KEYPAIR,
    GENERAL_STATE_KEYPAIR,
  ]);

  console.log(`Create Account CPI Success: ${txHash}`);
})();

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "DkuQ5wsndkzXfgqDB6Lgf4sDjBi4gkLSak1dM5Mn2RuQ"
  );

  // Airdropping some SOL
  await connection.confirmTransaction(
    await connection.requestAirdrop(PAYER_KEYPAIR.publicKey, LAMPORTS_PER_SOL)
  );

  // Our program's CPI instruction (create_account)
  const creataAccountIx = new TransactionInstruction({
    programId: programId,
    data: ACCOUNT_SPACE_BUFFER,
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: true,
        isWritable: true,
        pubkey: GENERAL_STATE_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: SystemProgram.programId,
      },
    ],
  });

  const transaction = new Transaction();
  // Adding up all the above instructions
  transaction.add(creataAccountIx);

  const txHash = await connection.sendTransaction(transaction, [
    PAYER_KEYPAIR,
    GENERAL_STATE_KEYPAIR,
  ]);

  console.log(`Create Account CPI Success: ${txHash}`);
})();

Comment créer un PDA

Une Adresse Dérivée d'un Programme est simplement un compte appartenant au programme, mais qui n'a pas de clé privée. Au lieu de cela, sa signature est obtenue par un ensemble de seeds et un bump (un nonce qui permet de s'assurer qu'elle est en dehors de la courbe). "Générer" une Adresse de Programme est différent de la "Créer". On peut générer un PDA en utilisant Pubkey::find_program_address. Créer un PDA signifie essentiellement initialiser l'adresse avec de l'espace et définir l'état. Un compte Keypair normal peut être créé en dehors de notre programme et ensuite alimenté pour initialiser son état. Malheureusement, pour les PDAs, elle doit être créée sur la blockchain, car elle ne peut pas signer en son nom. Nous utilisons donc invoke_signed pour passer les seeds du PDA, ainsi que la signature du compte de financement, ce qui entraîne la création d'un compte PDA.

Press </> button to view full source

use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    entrypoint,
    entrypoint::ProgramResult,
    program::invoke_signed,
    program_error::ProgramError,
    pubkey::Pubkey,
    rent::Rent,
    system_instruction,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer, writable] Funding account
/// 2. [writable] PDA account
/// 3. [] System Program
pub fn process_instruction(
    program_id: &Pubkey,
    accounts: &[AccountInfo],
    instruction_data: &[u8],
) -> ProgramResult {
    const ACCOUNT_DATA_LEN: usize = 1;

    let accounts_iter = &mut accounts.iter();
    // Getting required accounts
    let funding_account = next_account_info(accounts_iter)?;
    let pda_account = next_account_info(accounts_iter)?;
    let system_program = next_account_info(accounts_iter)?;

    // Getting PDA Bump from instruction data
    let (pda_bump, _) = instruction_data
        .split_first()
        .ok_or(ProgramError::InvalidInstructionData)?;

    // Checking if passed PDA and expected PDA are equal
    let signers_seeds: &[&[u8]; 3] = &[
        b"customaddress",
        &funding_account.key.to_bytes(),
        &[*pda_bump],
    ];
    let pda = Pubkey::create_program_address(signers_seeds, program_id)?;

    if pda.ne(&pda_account.key) {
        return Err(ProgramError::InvalidAccountData);
    }

    // Assessing required lamports and creating transaction instruction
    let lamports_required = Rent::get()?.minimum_balance(ACCOUNT_DATA_LEN);
    let create_pda_account_ix = system_instruction::create_account(
        &funding_account.key,
        &pda_account.key,
        lamports_required,
        ACCOUNT_DATA_LEN.try_into().unwrap(),
        &program_id,
    );
    // Invoking the instruction but with PDAs as additional signer
    invoke_signed(
        &create_pda_account_ix,
        &[
            funding_account.clone(),
            pda_account.clone(),
            system_program.clone(),
        ],
        &[signers_seeds],
    )?;

    // Setting state for PDA
    let mut pda_account_state = HelloState::try_from_slice(&pda_account.data.borrow())?;
    pda_account_state.is_initialized = true;
    pda_account_state.serialize(&mut &mut pda_account.data.borrow_mut()[..])?;

    Ok(())
}

let create_pda_account_ix = system_instruction::create_account(
    &funding_account.key,
    &pda_account.key,
    lamports_required,
    ACCOUNT_DATA_LEN.try_into().unwrap(),
    &program_id,
);

invoke_signed(
    &create_pda_account_ix,
    &[funding_account.clone(), pda_account.clone()],
    &[signers_seeds],
)?;

On peut envoyer les comptes requis via le client comme suit

Press </> button to view full source

import {
  clusterApiUrl,
  Connection,
  Keypair,
  LAMPORTS_PER_SOL,
  PublicKey,
  SystemProgram,
  Transaction,
  TransactionInstruction,
} from "@solana/web3.js";

const PAYER_KEYPAIR = Keypair.generate();

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "6eW5nnSosr2LpkUGCdznsjRGDhVb26tLmiM1P8RV1QQp"
  );

  // Airdop to Payer
  await connection.confirmTransaction(
    await connection.requestAirdrop(PAYER_KEYPAIR.publicKey, LAMPORTS_PER_SOL)
  );

  const [pda, bump] = await PublicKey.findProgramAddress(
    [Buffer.from("customaddress"), PAYER_KEYPAIR.publicKey.toBuffer()],
    programId
  );

  console.log(`PDA Pubkey: ${pda.toString()}`);

  const createPDAIx = new TransactionInstruction({
    programId: programId,
    data: Buffer.from(Uint8Array.of(bump)),
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: pda,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: SystemProgram.programId,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(createPDAIx);

  const txHash = await connection.sendTransaction(transaction, [PAYER_KEYPAIR]);
  console.log(`Created PDA successfully. Tx Hash: ${txHash}`);
})();

const PAYER_KEYPAIR = Keypair.generate();

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "6eW5nnSosr2LpkUGCdznsjRGDhVb26tLmiM1P8RV1QQp"
  );

  const [pda, bump] = await PublicKey.findProgramAddress(
    [Buffer.from("customaddress"), PAYER_KEYPAIR.publicKey.toBuffer()],
    programId
  );

  const createPDAIx = new TransactionInstruction({
    programId: programId,
    data: Buffer.from(Uint8Array.of(bump)),
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: pda,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: SystemProgram.programId,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(createPDAIx);

  const txHash = await connection.sendTransaction(transaction, [PAYER_KEYPAIR]);
})();

Comment lire des comptes

Presque toutes les instructions dans Solana nécessitent au moins 2 ou 3 comptes, et ils sont mentionnés dans les gestionnaires d'instructions dans quel ordre ils attendent ces comptes. C'est assez simple si on profite de la méthode iter() de Rust, au lieu d'indiquer manuellement les comptes. La méthode next_account_info récupère le premier index de l'itérable et retourne le compte présent dans le tableau des comptes. Voyons une instruction simple qui attend un ensemble de comptes et qui demande d'analyser chacun d'entre eux.

Press </> button to view full source

use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    entrypoint,
    entrypoint::ProgramResult,
    pubkey::Pubkey,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer] Payer
/// 2. [writable] Hello state account
/// 3. [] Rent account
/// 4. [] System Program
pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    // Fetching all the accounts as a iterator (facilitating for loops and iterations)
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;
    // Rent account
    let rent_account = next_account_info(accounts_iter)?;
    // System Program
    let system_program = next_account_info(accounts_iter)?;

    Ok(())
}

pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    // Fetching all the accounts as a iterator (facilitating for loops and iterations)
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;
    // Rent account
    let rent_account = next_account_info(accounts_iter)?;
    // System Program
    let system_program = next_account_info(accounts_iter)?;

    Ok(())
}

Comment vérifier des comptes

Puisque les programmes dans Solana sont sans état, nous, en tant que créateur de programme, devons nous assurer que les comptes passés sont valides autant que possible pour éviter toute entrée de compte malveillant. Ainsi, les contrôles de base que l'on peut effectuer sont

Vérifier si le compte du signataire attendu a effectivement signé
Vérifier si les comptes d'état attendus ont été vérifiés comme accessibles en écriture
Vérifiez si le propriétaire du compte d'état attendu est l'identifiant du programme appelé
Si vous initialisez l'état pour la première fois, vérifiez si le compte a déjà été initialisé ou non.
Vérifier si tous les identifiants de programmes croisés passés (si nécessaire) sont conformes aux attentes.

Une instruction de base qui initialise un compte d'état héroïque, mais avec les contrôles mentionnés ci-dessus, est définie ci-dessous

Press </> button to view full source

use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    clock::Clock,
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    program_error::ProgramError,
    pubkey::Pubkey,
    rent::Rent,
    system_program::ID as SYSTEM_PROGRAM_ID,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer] Payer
/// 2. [writable] Hello state account
/// 3. [] System Program
pub fn process_instruction(
    program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;
    // System Program
    let system_program = next_account_info(accounts_iter)?;

    let rent = Rent::get()?;

    // Checking if payer account is the signer
    if !payer_account.is_signer {
        return Err(ProgramError::MissingRequiredSignature);
    }

    // Checking if hello state account is rent exempt
    if !rent.is_exempt(hello_state_account.lamports(), 1) {
        return Err(ProgramError::AccountNotRentExempt);
    }

    // Checking if hello state account is writable
    if !hello_state_account.is_writable {
        return Err(ProgramError::InvalidAccountData);
    }

    // Checking if hello state account's owner is the current program
    if hello_state_account.owner.ne(&program_id) {
        return Err(ProgramError::IllegalOwner);
    }

    // Checking if the system program is valid
    if system_program.key.ne(&SYSTEM_PROGRAM_ID) {
        return Err(ProgramError::IncorrectProgramId);
    }

    let mut hello_state = HelloState::try_from_slice(&hello_state_account.data.borrow())?;

    // Checking if the state has already been initialized
    if hello_state.is_initialized {
        return Err(ProgramError::AccountAlreadyInitialized);
    }

    hello_state.is_initialized = true;
    hello_state.serialize(&mut &mut hello_state_account.data.borrow_mut()[..])?;
    msg!("Account initialized :)");

    Ok(())
}

pub fn process_instruction(
    program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();
    let payer_account = next_account_info(accounts_iter)?;
    let hello_state_account = next_account_info(accounts_iter)?;
    let system_program = next_account_info(accounts_iter)?;

    let rent = Rent::get()?;

    // Checking if payer account is the signer
    if !payer_account.is_signer {
        return Err(ProgramError::MissingRequiredSignature);
    }

    // Checking if hello state account is rent exempt
    if !rent.is_exempt(hello_state_account.lamports(), 1) {
        return Err(ProgramError::AccountNotRentExempt);
    }

    // Checking if hello state account is writable
    if !hello_state_account.is_writable {
        return Err(ProgramError::InvalidAccountData);
    }

    // Checking if hello state account's owner is the current program
    if hello_state_account.owner.ne(&program_id) {
        return Err(ProgramError::IllegalOwner);
    }

    // Checking if the system program is valid
    if system_program.key.ne(&SYSTEM_PROGRAM_ID) {
        return Err(ProgramError::IncorrectProgramId);
    }

    let mut hello_state = HelloState::try_from_slice(&hello_state_account.data.borrow())?;

    // Checking if the state has already been initialized
    if hello_state.is_initialized {
        return Err(ProgramError::AccountAlreadyInitialized);
    }

    hello_state.is_initialized = true;
    hello_state.serialize(&mut &mut hello_state_account.data.borrow_mut()[..])?;
    msg!("Account initialized :)");

    Ok(())
}

Comment lire plusieurs instructions à partir d'une transaction

Solana nous permet de consulter l'ensemble des instructions de la transaction en cours. Nous pouvons les stocker dans une variable et itérer sur eux. Nous pouvons faire beaucoup de choses avec ça, comme, par exemple, vérifier les transactions suspectes.

Press </> button to view full source

use anchor_lang::{
    prelude::*,
    solana_program::{
        sysvar,
        serialize_utils::{read_pubkey,read_u16}
    }
};


declare_id!("8DJXJRV8DBFjJDYyU9cTHBVK1F1CTCi6JUBDVfyBxqsT");

#[program]
pub mod cookbook {
    use super::*;

    pub fn read_multiple_instruction<'info>(ctx: Context<ReadMultipleInstruction>, creator_bump: u8) -> Result<()> {
        let instruction_sysvar_account = &ctx.accounts.instruction_sysvar_account;

        let instruction_sysvar_account_info = instruction_sysvar_account.to_account_info();

        let id = "8DJXJRV8DBFjJDYyU9cTHBVK1F1CTCi6JUBDVfyBxqsT";

        let instruction_sysvar = instruction_sysvar_account_info.data.borrow();

        let mut idx = 0;

        let num_instructions = read_u16(&mut idx, &instruction_sysvar)
        .map_err(|_| MyError::NoInstructionFound)?;

        for index in 0..num_instructions {
            let mut current = 2 + (index * 2) as usize;
            let start = read_u16(&mut current, &instruction_sysvar).unwrap();

            current = start as usize;
            let num_accounts = read_u16(&mut current, &instruction_sysvar).unwrap();
            current += (num_accounts as usize) * (1 + 32);
            let program_id = read_pubkey(&mut current, &instruction_sysvar).unwrap();

            if program_id != id
            {
                msg!("Transaction had ix with program id {}", program_id);
                return Err(MyError::SuspiciousTransaction.into());
            }
        }

        Ok(())
    }

}

#[derive(Accounts)]
#[instruction(creator_bump:u8)]
pub struct ReadMultipleInstruction<'info> {
    #[account(address = sysvar::instructions::id())]
    instruction_sysvar_account: UncheckedAccount<'info>
}

#[error_code]
pub enum MyError {
    #[msg("No instructions found")]
    NoInstructionFound,
    #[msg("Suspicious transaction detected")]
    SuspiciousTransaction
}

let mut idx = 0;
let num_instructions = read_u16(&mut idx, &instruction_sysvar)
.map_err(|_| MyError::NoInstructionFound)?;


for index in 0..num_instructions {
    
    let mut current = 2 + (index * 2) as usize;
    let start = read_u16(&mut current, &instruction_sysvar).unwrap();

    current = start as usize;
    let num_accounts = read_u16(&mut current, &instruction_sysvar).unwrap();
    current += (num_accounts as usize) * (1 + 32);

}

# Écrire des Programmes

# Comment transférer SOL dans un programme

# Comment obtenir une référence à l'horloge dans un programme

# Passer l'Horloge comme un compte dans une instruction

# Accéder à l'horloge directement dans une instruction

# Comment modifier la taille d'un compte

# Comment faire l'Invocation de Programme Croisé

# Comment créer un PDA

# Comment lire des comptes

# Comment vérifier des comptes

# Comment lire plusieurs instructions à partir d'une transaction

Écrire des Programmes

Comment transférer SOL dans un programme

Comment obtenir une référence à l'horloge dans un programme

Passer l'Horloge comme un compte dans une instruction

Accéder à l'horloge directement dans une instruction

Comment modifier la taille d'un compte

Comment faire l'Invocation de Programme Croisé

Comment créer un PDA

Comment lire des comptes

Comment vérifier des comptes

Comment lire plusieurs instructions à partir d'une transaction